Goal Zero 10 Amp Charge Controller

Name: Goal Zero 10 Amp Charge Controller
SKU: 96100
Price: 69.95 USD
Availability: InStock
Rating: 5 (1 reviews)

1 Review

Ask a Question

Item Code: 96100

Ship Weight: 1 lbs.

Regular Price: $79.95

Sale Price: $69.95

You Save 13% ($10.00)

Product Details

Monitor and regulate solar input for 12V batteries with the 10 Amp Charge Controller. Designed to integrate seamlessly with Goal Zero solar panels, the charge controller comes with a pre-installed 8mm solar connector and an easy-to-read LED screen. Equipped with an IP65 rating, the charge controller is weather resistant and dustproof, allowing for protection against the elements when powering off-grid adventures or outdoor equipment.

•	Designed to monitor and regulate solar input for 12V batteries. For solar charging with 100 watts and below, we recommend the 10 Amp Charge Controller. For solar charging with more than 100 watts, we recommend the 20 Amp Charge Controller
•	Charge Controller comes with an integrated 8mm Goal Zero solar connector. To connect and charge a 12V battery, you must purchase the Spade to SAE Cable and additional cable adaptors. We recommend either the SAE to Ring Terminal or SAE to Alligator Clip.
•	Will not work with Yeti X Power Supply.
•	Designed for the following Panels: Boulder 50 Watt Solar Panel Boulder 100 Watt Solar Panel Boulder 100 Watt Briefcase Solar Panel

Specifications

General Information
Manufacturer Name:	Goal Zero
Compatible With:	100 Watt and below Solar Panels
Input/Output terminal:	M5 terminals
Input Port: Solar Port: (blue, 8mm):	14-22.5V up to 10A
Fuse:	15A replaceable
Charge Controller:	PWM
Weight:	14.4oz (408g)
Dimensions:	6.10" x 3.90" x 1.02" in (15.5 x 9.91 x 2.6cm)
IP Grade:	IP65
Spade to 8mm Cable Length:	3ft
Operating temperature:	-25C to 50 C/ -13 F to 122 F
Warranty:	12 Months
Certs:	IC, FCC, CE-EMC, CE-LVD
Battery Pairing Details
Rated solar panel amps GZ-10:	10A
Normal input solar cell array voltage:	15-22V
Max solar cell array voltage (output has no load):	25V
Lowest operating voltage at solar or battery side:	8V Minimum
Start Voltage at 25C:	3-10V
LTO Battery:	14.0V
Gel battery:	14.1V
LiFePO4 battery:	14.4V
Charge Voltage at 25C:	AGM battery - 14.4V
WET battery:	14.7V
Calcium battery:	14.9V
Equalizing Voltage at 25�C:	WET or Calcium battery-15.5V
Gel, AGM, WET, Calcium batteries:	13.6V
LTO and LiFePO4 batteries:	13.4V
Battery temperature compensation coefficient:	-24mV/C

10 Amp Charge Controller Manual

What's Included

What's Included:

• (1) 10A Charge Controller
• (1) Spade to 8mm Cable

Goal Zero 10 Amp Charge Controller

You May Also Like