Renogy 400 Watt 12 Volt Monocrystalline Solar Kit

Tech Specs
Solar Panel Dimensions:	47 X 21.3 X 1.4 inches
Solar Panel Weight:	16.5 Lbs. each
Maximum System Voltage:	600V DC (UL)
Operating Voltage:	18.9V
Optimum Operating Current:	5.29A
Charge Controller:	30A PWM Negative Ground Controller
Charger Controller Nominal Voltage:	12V DC
Charge Controller Rated Charge Current:	30A
Charge Controller Max PV Input:	Voltage: 25V DC. Power: 400W (12V)
Mounting Brackets:	Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt and Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Four M6 Split Lock Washer and Eight M6 Flat Washer Four M6 Hexagonal Nuts
MC4 Branch Connectors (A Pair):	Withstanding Voltage: 1000V DC(TUV), 600V(UL) Protection Degree: IP67, mated Wiring Size Range: 10, 12, 14 AWG Temperature: -40 F to +195 F
20' 10AWG MC4 Adaptor Kit (A Pair):	Rating Voltage: 600/1000V Temperature: -40 F to +185 F
8ft 10AWG Tray Cables (A pair):	Rating Voltage: 600/1000V Temperature: -40 F to +185 F

1. Glass: 3.2mm tempered glass, excellent mechanical loading performance, resists 5400PA snow loads and 2400PA wind load.

2. & 4. EVA Film: main component is 30%-33% of EVA, which assures a high transmission, strong adhesion and long term performance.

3. Cell: excellent performance in low light environment and high conversion efficiency guaranteed.

5. Frame: strong corrosion resistant aluminum frames.

6. Backsheet: both sides of backsheet are coated with fluoro resin to prevent aging. This unique structure allows our backsheet to provide perfect adhesion with EVA and junction box.

Quality Assurance:

Industry-leading Testing Approved (Under UL1703, IEC 61215, IEC 61730 Standards)
Thermal Cycling Test
Thermal/Freezing and High Humidity Cycling Test
Electrical isolation test
Mechanical, Wind and Twist Loading Test
Salt Mist Test
Light and Water-exposure Test
Moist Carbon Dioxide/Sculpture Dioxide

What's Included:

• (4) 100 Watt Monocrystalline Solar Panels
• (1) 20' 10AWG MC4 Adapter Kit
• (4) Z Bracket Mounting Sets (4 in each)
• (1) 8' 10AWG Tray Cable
• (3) MC4 Branch Connector Sets (2 in each)
• (1) Wanderer 30A PWM Charge Controller