| General Information |
| Manufacturer Name: |
EcoFlow |
| Dimensions: |
Hybrid Inverter: 27.2" x 18.7" x 8.42" in
Battery: 26" x 18" x 8" in |
| Weight: |
Hybrid Inverter: 70 lbs
Battery: 116.4 lbs |
| Temperature Requirements: |
-4F - 113F |
| Battery Capacity: |
6144 Wh, 102.4V |
| Connection: |
Wi-Fi, Bluetooth, 4G, Screen |
| Warranty: |
5 Years |
| Standby Power Consumption: |
Less than 12W |
| Max Operating Altitude: |
9842.5 Ft |
| Protection Level: |
IP54 |
| Noise: |
Less than 30 dB |
| Inverter Specifications (Bidirectional Inverter Discharging) |
| AC Output: |
6*AC Outlets - 120V/240V, 7200W Total |
| UPS Backup: |
UPS Port (L1 Phase greater than 20ms); online UPS Port (L2 Phase 0ms) |
| No Load Consumption: |
Greater than 45W |
| Efficiency of AC Output of 100W: |
70% |
| Discharging Efficiency at Full Load: |
94% |
| Inverter Specifications (Bidirectional Inverter Charging) |
| Charging Voltage: |
C20 Input: Support 100V-120V / 220V-240V; Power Input/Output Port: Support 100V-120V /220V-240V
The two ports of C20 and Power input/output are mutually exclusive. Please do not charge both at the same time. |
| AC Input Power Adjustment: |
Supported, and is adjustable in all charging modes |
| AC Charging Method: |
AC Input, Power Input/Output Port (AC Charging Pile/Generator/SHP2) |
| AC Charging Input: |
AC Charging Pile Supported: 120V/240V, 30A, 3600W/7200W Max |
| AC Charging |
| C20 Charging: |
Supported: 120V, 15A, 1800W Max; 240V, 12.5A, 3000W Max |
| Protection: |
Protection from Lightning and Surges |
| DC Output |
| USB-A *2: |
5V, 2.4A, 12W |
| USB-C *2: |
5V, 9V, 12V, 15V, 20V, 5A, 100W Max |
| Anderson Port: |
12.6V, 30A, 378W Max |
| MPPT |
| High Voltage PV: |
80-450V, 15A, 4000W Max |
| Low Voltage PV: |
30-150V, 15A, 1600W Max |
| Power input/output High Voltage Port |
| Parallel Connection: |
Supported |
| Grid-tie: |
Not supported |
| Smart Home Panel 2: |
Supported |
| Car Charing input: |
Not supported |
| Pro Ultra Battery Specifications |
| Battery Capacity: |
6144Wh, 102.4V, 32S3P |
| Battery Chemistry: |
LFP |
| Cell Specs: |
20Ah, 3.2V |
| Cell Efficiency: |
AC full loading ≥95% |
| Operating Temperature: |
Charging Temperature：-4F-113F (Turn on self-heating below 32F, no derating below 104F)
Discharging Temperature：-4F-113F |
| Battery Heating: |
Yes (automatically start below -4F) |
| Cycle Life: |
3500 cycles to 80%+ capacity |
| Battery Balance: |
Automatic control of the charging/discharging limit of each battery pack |
| Protection: |
Over Temperature
Low Temperature
Over Voltage
Low Voltage
Overload
Short Circuit
Overcurrent |
| Smart Home Panel 2 |
| Manufacturer Name: |
EcoFlow |
| Dimensions: |
Distribution Panel: 25.5" x 15" x 6.7" in
Battery Connection Box: 7" x 14.4" x 5.8" in |
| Weight: |
Distribution Panel: 40.8 lbs
Battery Connection Box: 12 lbs |
| Wi-Fi: |
Supported |
| Bluetooth: |
Supported |
| Ethernet: |
Supported |
| 485 Communication Interface: |
Supported (For internal debugging only) |
| Display: |
LED indicator on energy storage box (grid indicator, fault indicator, power backup indicator) |
| Standby Power Consumption: |
Less than or equal to 5W |
| Altiude: |
2000 m |
| Operating Temperature: |
-22 - 122F |
| Storage Temperature: |
-40 - 158F |
| Humidity: |
100% |
| Protection Level: |
Distribution Panel: NEMA Type 3R Rainproof
Battery Connection Box: NEMA Type 1 |
| EMC: |
Distribution Panel: Class B
Distribution Panel with battery connection cable: Class A |
| Warranty: |
10 Years |
Satisfaction Guarantee
Smart Home Panel 2 Manual